As the temperatures drop is the perfect time to crank up the heat. Nothing compares to the comfort of fireplaces. If you’re bored from the mess and lack of efficiency that comes with wood fireplaces, It’s an ideal time to switch to. The gas fireplace insert is a simple, affordable installation to improve heat efficiency in your house with out sacrificing the comforts. What is a better present you can give yourself than a gift?
The average cost of gas fireplace
- Average Cost: $2,000
- Highest Cost: $6,000+
- The Lowest Cost: $1,000
Cost of installation and labor
Inserts for gas fireplaces are placed within existing fireplaces that have wood-burning, making the total cost less than installing a completely new system. The fireplace insert will cost about $1200, and labor costs range from $500 to $3,500 depending on the size and complexity of the task.
You must consider this even if you aren’t using the wood stove, pets plants, old soot, and weather damage could all influence the furnace and flue. You can expect these extra costs to add $200-$1,000 to the final price.
Vented vs. Unvented
Vents for gas fireplaces are related to the different gas logs used in your fireplace. Ventilated gas logs create carbon monoxide. Therefore, your fireplace must have an exhaust pipe and chimney, some method for the byproduct to escape. They are less efficient than gas logs that are not vented as certain heat escapes via the chimney. Ventilated gas logs cost more. However, the flames and log sets look more like wood-burning fireplaces than non-vented gas logs.
Gas logs that are not vented may appear less authentic however they’re also more efficient and cost-effective. They don’t require chimneys which means that any gasses will be released into the home. Sensors in the fireplace should inform you if there’s a danger, and the majority of fireplaces with these features will automatically shut off. Be aware that certain states will not permit gas fireplaces that are not vented. Ventilated units could provide the most incredible amount of sense if an existing chimney system could be used to circulate.
Gas fireplace insert repair cost
One of the main benefits of installing a gas fireplace is that most components are repairable or replaced. This allows that fireplace unit to endure for a long time, especially if you maintain it regularly and treat it with care. As any repair is likely to be involving the gas lines of your home (whether directly or peripherally), we suggest you contact an expert in service if you are uncertain or unfamiliar with gas lines and gas installation.
Repair expenses for fireplaces that use gas are relatively low and usually range from $100-$200. The final price is contingent on various factors, including the size and condition of your fireplace, the location you reside in, parts that must be replaced, the season and significant weather, and the speed at which you require repairs to be completed. Keep in mind that you can search around and ask contractors for the most accurate estimate for your project.
The benefits of installing a gas fireplace
Gas Fuel Supply
In general, gas is a more reliable energy source than wood or electricity. Gas fires mean that you’ll still have heat the power is cut off, and it eliminates the necessity of finding or purchasing firewood entirely.
Read More: What Is Furnace Heat Exchanger? And How To Know That Your Furnace’s Heat Exchanger Is Poor?
Efficiency and EPA conforming
Fireplaces with gas inserts are very efficient, saying that they can heat your home without losing heat. The best fireplaces come with efficiency ratings of 91%, and even the smallest ones will be around 65 percent. This is significantly higher than the open hearth or wood-burning fireplace. Modern gas fireplaces must comply with or surpass EPA guidelines for clean burning.
Simple to use
The flick of the switch can switch fireplaces made of gas on and off. You don’t have to worry about the fire going out if you don’t remember to add additional logs. A gas fireplace will continue to run until it’s turned off. Specific models feature automated shut-offs or timers. It is also possible to control specifics such as the temperature and the height of the flame.
Retrofit your fireplace with wood
Since fireplace inserts made of gas are designed to fit in an existing fireplace that is wood-burning space, there’s no need to undertake a massive remodeling, which will save both time and cost. Plus, it means you do not have to remove the hearth you love so much, particularly if you consider it is appealing to the eye or significant to your home. Be aware that older homes might not have standard-sized fireplaces making it challenging to find the perfect size. It is not always possible.
How much gas are gas fireplaces using?
Approximately 20 cubic meters of natural gas are consumed every hour by a typical 20,000 BTU gas fire. Natural gas costs about $1.09 per 100 cubic feet, so using a required gas heater at 100% heating capacity will cost roughly $0.22/hour. In conclusion, gas fireplaces are relatively cheap to operate.
Can you snooze in a space with a gas fireplace?
Sleeping close to an open flame device (such as a gas fire or gas boiler) is against the law and dangerous for your health.
How to install a gas fireplace?
Materials Needed
- Gas line and shut-off valve
- Fireplace unit
- Venting system
- Wall switch or remote control
- Gas connectors and fittings
- Tools such as adjustable wrenches, screwdrivers, and a drill
Step 1: Planning the Installation
Determine the location of the gas line and shut-off valve.
Decide on the type of gas fireplace you want and the venting system required.
Check local building codes and regulations to ensure compliance.
Step 2: Preparing the Fireplace Unit
Assemble the fireplace unit according to the manufacturer’s instructions.
Test the unit to make sure it works properly.
Place the unit in the desired location, making sure it is level and secure.
Step 3: Connecting the Gas Line
Connect the gas line to the shut-off valve, using a wrench to tighten the fittings.
Connect the gas line to the fireplace unit, again using a wrench to tighten the fittings.
Test for gas leaks using a leak detector solution.
Step 4: Installing the Venting System
Install the venting system according to the manufacturer’s instructions, making sure it is properly sealed.
Connect the venting system to the fireplace unit, securing it with screws or brackets.
FAQs
- Do you have the option of adding a fireplace to an existing home?
Yes, you can install the fireplace in your existing house. So long as you’re willing to pay for it and the local building codes allow for the installation of a suitable fireplace and a warm fireplace to your home is feasible. Do your homework before choosing the type of fireplace that best suits your needs and budget. The price for the installation, the design of the unit, the effectiveness of heating your home, and the length of the structure all need to be considered before beginning a major project such as the installation of a fireplace.
- How can I cut costs on gas fireplaces?
Due to its increased efficiency in energy use, a fireplace insert can almost always reduce heating expenses, especially when it takes over the fireplace that burns wood or expands heating coverage. Maintenance costs are low, and the option to use the existing fireplace (instead of building a new one) can save you money. Although they are costly initially, gas fireplace inserts will be a long-term savings investment.
- Are gas fireplaces worth it?
If you’re in the market for a fireplace, the Gas fireplaces can typically be much more than worthwhile. Fireplace inserts made of gas are not just efficient and safe. They’re also cleaner and more secure than traditional fireplaces made of wood. It is simple to manage and maintain and maintain, gas fireplaces don’t require additional fuel, and they can rapidly heat an area. Contrary to electric fireplaces, they can be employed when the electricity goes out. Specific models do not require venting is necessary, which means there is no need for a chimney or flue, making them reasonably easy to use.
